Screen Printing Machine Wash Tank Vertical Rinse Sink Washout Booth

  

110V Quick Clean Screen Printing Wash Tank Vertical Rinse Sink Washout Booth with Backlight. Multi-function Stand Type Screen Printing Frame Washout Tank with LED Backlight Screen Printing Equipment This vertical type screen Printing washout tank is mainly used to wash the plate which is exposed and check the Effect of plate making. Chemical & screen frame shown in this picture are not included. Rinse tank long 60 cm ; Width 80 cm, tall 80 cm; screen frame fit size is length 80 cm to 80 cm length 2.

The back of rinse area install 54 x 54cm LED flat light(power48W);Can be directly observed during flushing screen mesh; 3. LED lights isolation plate install 4 mm acrylic transparent board; The waterproof board resistant to cleaning, abrasion resistance, anti-aging, long-term use without deformation, no damage. At the front set have curtain, to prevent when the spray splash to the operator. There are three height adjustment holes on both sides of the curtain, So that the curtain can be adjusted up and down 14 cm;according to the height of operator and adjust it.

There are rack in the tank it can be according to screen dimension and rinse screen frame angle in any different positions. The edge of baffle have water hole, so the water flow into the sewer in time. With s-shaped odor-proof sewer, the length of it is 300cm. Put four heights or width of 55cm frame in rack at the same time, when you couldn't use the rack and push to the side.

The lower part of the water control rack is equipped with a water tray, and the remaining water on the screen is collected and cleaned up together. The bottom of water control rack install clapboard, could place tools and materials. The bottom of machine install wheels, move it at will. The machine adopts electrostatic spraying, corrosion resistance, resistant to cleaning, no rust. The machine adopts modular structure;equipped with full set tools and instruction. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Screen Printing". The seller is "pro-signsmaker" and is located in this country: US. This item can be shipped worldwide.

• Model: Silk Screen Printing Wash Tank
• Type: Washout Booth
• MPN: 6565002306501
• Power: 48W
• Brand: QOMOLANGMA
• HS code: 3922900000
• Attachment material: Stainless steel or zinc plating, nickel plating
• Packing volume: 0.289 m³
• Product Color: Blue
• Product Name: SPE-CBG Stand Type Washout Tank with LED light
• Machine using material: steel plate
• Machine surface treatment: Electrostatic spraying
• Tank size: 31 x 24 x 31in(80 x 60 x 80 cm)
• Voltage: 110 V
• UPC: 760934515017