Screen Printing Machine Exposure Unit Silk Screen Printing LED Light Box Plate

  
Screen Printing Exposure Unit 18"x12" Silk Screen Printing Machine UV Light 60W. This small exposure unit mainly used for exposure small screens, printing plate, hot stamping ;exposing area is 4632cm. There are four 15W light tubes;the exposing area is 4632cm;Adopt countdown timer to set the exposing time;the timer will automatically save and memory your set data. Machine using material: iron plate. Machine surface treatment: Electrostatic spraying.

Attachment material: Stainless steel or zinc plating, nickel plating. 1, There are four 15W light tubes(total power of light tubes 60W;spare part:one tube and a Ballast), it can normally be used for about 10,000 hours. 2, The exposing area is 4632cm.

3, Equipped with 8mm Tempered glass plate, resistant to friction;the glass is broken, the glass shards are no sharp, to ensure the safety of operator. 4, The timer can set the exposing time, after reach the exposing time, the machine automatically turns off the tubes. 5, The timer have automatic memory function, set in once, whether the number of switch turn on or off, time will save. 6, This machine equipped with 20306cm sponge, used for press the film more closely, place a flat weight, improve the quantity of exposing. 7, Equipped with shading cloth, cover the top of whole machine, block the damage to the operator. 8, To ensure the transportation safety of tubes, all tubes are individually packaged in box, when install, remove the glass by sucker, insert the plugs on the two sides of tubes one by one, place the glass and use it.