Manual Single Color Balloon Screen Printing Machine Desktop Printing Equipment

  

Manual Single Color Balloon Screen Printing Machine Desktop Printing Equipment. For the activity of the individual or unit such as wedding, birthday, opening, theme or blessing language, design is printed on adornment balloon, this can show the class of the activity to the utmost and savour, a lot of people still regard such adornment balloon as souvenir to collect, small batch of the personalized printing demand is very broad.

In the European and American countries, people very like all sorts of big and small festival activity, family birthday party, adult ceremony, graduation ceremony, balloon becomes the most important adornment, people can press oneself like, stick main body, decorate balloon printing to become souvenir, and this can raise activity to a new class. This set of equipment is equipped with all the machines required for silk screen printing monochrome balloon, including silk screen printing machine, balloon limit table, air pump, screen frame, balloon, balloon sealing clamp, scraper, mesh and other materials and tools. This set equipment is very suitable for wedding companies, wedding gift shop, advertising production shop, flower gift shop, business etiquette companies, hotels and other businesses specializing in personalized custom use.

This set equipment includes: One balloon screen printing machine One balloon air pump (110V or 220V voltage optional) One balloon limit table Free materials and tools. 2 screen frame; A scraper with a width of 14cm; 100 pieces mixed-color balloons;100 pieces Balloon seal clip. Install the screen plate on the machine: 2. Use air pump to blow the balloon to a certain degree, and then place it on the balloon platform of the screen printing machine.

Place the balloon in the middle of press plate, put down the screen plate, and check whether the printed pattern is fully attached to the balloon; Balloon expansion is too large or too small, the balloon can be properly deflated or inflated, or adjust the height of the chuck to achieve the most appropriate printing standards. Take out the balloon with appropriate air pressure and place it on the limit platform. Adjust the baffles on both sides of the limit platform. Make both sides of the limit board stick on the balloon edge, fixed limit board, print after the balloon inflation with limit board as the standard. Start printing, inflate the balloon and seal the air outlet with balloon clip.

Place on the screen printing table, press the pressure plates on both sides of the balloon. Print, lift the screen plate, open the pressure plate, take out the balloon.

Basic functions of this machine. Screen frame chuck can be adjusted up and down 176 mm; Just loosen 4 handles on the back, move up and down the strip hole, and tighten the handle after moving to the appropriate position. Chuck balance support handle is located at the back of the middle, it can adjust the chuck and frame parallel, down or up.

The balloon placement platform can move forward and backward as required. Both sides of explosion-proof safety baffles can move up and down, forward and backward. Protect your safety when the balloon may burst.

The pressure ball board on the upper part of the explosion-proof board can be flipped and moved around. Screen frame handle can be installed on the side and upper part. The baffles on both sides of the balloon limit table and the blowhole upright plate can move around according to the size of the balloon. All parts that may come into contact with the balloon shall be installed with protective rubber strips to ensure that there is no sharp object in contact with the balloon during the whoe printing process. Printing balloons must use special balloon ink or rubber ink, the ink has good ductility, the printed design when inflating will not crack after deflating ink, ink, when re-inflating, still can restore the original complete pattern, specific use method please consult the ink dealer.

006210 A type DQS one color balloon screen printing machine configuration list. A screen printing machine a ballon infator a ballon inflating holder 100 pcs of random color ballon 50pcs of ballon sealing clips 48pcs of binder clips 5 pcs of plastic chains 9.5 squeegee one yard of mesh 2 pcs of screen frame. Item included(006210): 1A Type DQS One Color balloon Complete set of screen printing equipment. Orders are processed from Monday-Friday; Not on the weekends & public holidays. We will work with you to get the case resolved in the fastest method.

Please contact with us at first for more details. If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it's much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. If an item is received damaged, customer service must be contacted within 7 days of receiving your item.

Payments via eCheck do not clear immediately. Usually you will wait 5-7 days after checkout for it to clear. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Screen Printing". The seller is "techtongda365" and is located in this country: US. This item can be shipped to United States.

• Brand: TECHTONGDA
• Ink Type: special balloon ink or rubber ink
• Type: Equipment
• MPN: 006210
• Number of Color Stations: 1 Color
• Automation Type: Manual
• Number of Press Stations: 1 Station
• UPC: 715569451940