Manual Curved Screen Printing Machine Printer for a diameter of less than 170 mm. This machine is mainly used for cylindrical and conical products; such as cylindrical, conical products made of various plastics, glass, metal materials, including wine bottles, medicine bottles, cosmetic bottles and other packaging bottles; mugs, Mugs, beer mugs, wine glasses and other cups; glass tubes, pens, ballpoint pens, fishing rods, bats and other small cylindrical products. For cylindrical and conical products, the printing surface has large depressions or protrusions, and there are non-planar pits in the printing surface, which is not suitable for printing by this machine.
This curved screen printing machine is mainly used for printing cylindrical and conical products with a diameter of less than 170 mm. This machine adopts the front and rear push-pull structure; suitable for printing width 200 mm; length 250 mm internal pattern; suitable for the use of various screens with an outer diameter of 280 450 mm and a thickness of less than 40 mm.2, the machine adjusts and positions the height of the rear main frame. According to the height of the substrate, the rear main beam is loosened by adjusting the connection screw between the main frame of the screen and the rear (no need to remove the screws), and the whole moves to the long hole Just the right place. The vertical adjustment range is 160 mm.
3, the printing frame of the substrate is designed to be movable left and right, and the three fixed aluminum strips at the bottom are directly installed on the two sides of the base. The aluminum strip base can be moved forward and backward by 300 mm; Mounting strip for the substrate positioning bracket. The three mounting bars can be moved left and right as needed.Installation of aluminum bar displacement: Loosen the two screws of the mounting bar, move to a suitable position, and tighten the two screws to complete the positioning. 4, three sets of printing materials are used to place the rollers, which are metal bearing rollers (diameter 19 mm); nylon bearing rollers diameter plastic bearing rollers (diameter 50 mm), users can replace and use as needed. Both the main frame and the attached frame Install three rollers. The bearing mounting bracket is directly fixed in the long hole of the aluminum strip installation, and can move up to 110 mm left and right according to the width of the substrate; 4 mounting brackets are attached, the bearing on the original main mounting bracket is removed, and the additional mounting bracket is directly fixed on the main with screws On installation, it is mainly used for printing conical products. The additional mounting bracket can be moved up and down by 20 mm. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal.
We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately.If it's non-workdays, please kindly be patient and wait till Monday. Dia less than 170 mm cylindrical & conical.
This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Screen Printing". The seller is "topsupplierinchn2017" and is located in this country: US. This item can be shipped to United States.