Thoughtful Design:Screen frame holder could rotary at 360 degree. Each screen frame holder has a locating detent, put it closely in the locating wheel, then can make sure the plate is exactly. According to the weight of the screen frame, spring tension can be adjusted by the screws to achieve balance; adjust the knobs on the chuck, will clamp the screen frame tightly. Platen is mounted directly on the printer arm with self-tapping screw. Application:It is mainly used for 4 colors T-shirt overprinting.
This is a manual registration screen printing equipment, need to be fixed on the table. Specification:Width of the screen frame check: 7.8" /20cm (max external size 24"/60cm, max thickness 1.6"/ 4cm) ;Screen frame check can be adjusted up & down within 1.6"/4cm; T-shirt platen size: 22x18x0.7 inch/ 55x45x1.8cm. Notice: Before the complete installation, all the screws should be not fully tightened;When finished all parts' installation and the overall machine is adjusted alright, we can tighten all the screws Item Included: 1 set of 4 Color 1 Station Simple Press (006360). Any product you return must be in the same condition you received it and in the original packaging. We usually respond within 24 hours on weekdays. Thank you for shopping at our store. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Screen Printing". The seller is "itashchor_0" and is located in this country: US.This item can be shipped to United States.