- Screen Printing Machine
- Automation Type
- Brand
- Material
- Package Size
- Printing Speed
- 1200 Times / Hour (2)
- 150mm / S (4)
- 180mm / S (2)
- 20-100mm / S (9)
- 20-150mm / S (4)
- 20-30mm / H (6)
- 20~100mm / S (6)
- 22.5mm / H (2)
- 30 - 50 Mm / H (2)
- 30-100mm / S (3)
- 30-120mm / S (2)
- 30mm / H (2)
- 50mm / H Max (7)
- 60-120mm / S (2)
- 60mm / S (3)
- 800pcs / Hr (2)
- 80mm / S (2)
- Max 60mm / H (3)
- Max 80mm / H (2)
- Up To 30mm / H (2)
- ... (2561)
- Voltage
Artillery Sidewinder X1 3D Printer The Latest 4th Version Reset Key TFT Screen
Product Features: Exclusive Ultra-Quiet Stepper Driver - Dissipated much less heat and maintaining a higher torque comparing to other quiet stepper drivers available. Synchronized Dual Z System - Make sure both side of the gantry move ups and downs the same height and at the same speed, ensure the X carriage always move parallel to the build plate, even when one of the Z-stepper breaks down. Direct Drive Extruder - With Titan Extruder, it makes your printer more reliable, especially for flexible filaments. AC Heating Platform - For quick heating, easy to remove print models and save on masking tape.
Power Failure Protection - Continue printing from the position where the last print was stopped during the power failure, and you can stop the continuous operation or power off. Easy to Use - The 3D printer is easy to install and remove, touch screen control makes it easy to use. Product Description: Artillery Sidewinder-X1 is a 3D printer with power panic, quiet stepper drivers, direct drive extrusion, filament runout sensor, dual Z system, AC heating platform, touch screen. Adjust the print version first when you use it 2.
After the printing is completed, do not directly turn off the power of the machine. Instead, the cooling fan of the extrusion head should continue to work in order to quickly lower the temperature, so as to avoid the blockage caused by thermal expansion. Turn on the cooling fan again after heating. Do not heat the extrusion head for a long time without using the printer.The item "Artillery Sidewinder X1 3D Printer The Latest 4th Version Reset Key TFT Screen" is in sale since Sunday, April 26, 2020. This item is in the category "Computers/Tablets & Networking\3D Printers & Supplies\3D Printers". The seller is "mingweiadv" and is located in Chino, California.
This item can be shipped to United States.
- Maximum Print Speed: 150 mm/s
- Maximum Travel Speed: 250mm/s
- Brand: Artillery
- MPN: Does Not Apply
- Model: Sidewinder X1
- Max. Printing Depth: 300mm
- Interface: USB
- Features: Adjustable Print Speed,Heated Build Plate,Reset Key
- Filament Diameter: 1.75mm
- Extruder Type: Titan Extruder (Direct Drive)
- Connectivity: USB, TF Card, USB Stick
- Control Board: MKS Gen L
- Nozzle Type: Volcano
- Maximum Print Size: 300*300*400MM
- Nozzle Size: 0.4mm