The gravity balance plate can move forward and backward in 4 inch. Height adjustment: Place the screen frame flat on the platform. According to the substrate height or printing requirements, rotate the handle up & down to reach an appropriate height, then lock the height with the two rear positioning handles. Left and right adjustment: loosen the handle on both sides of the press, and rotate the handle to move slightly left and right as required, after adjustment tighten both handles. Back and forward adjustment: First, slightly loosen that four red knobs overhead the clamp, then loosen the metal knobs on both sides of the clamp and move front and rear as required.
After adjusting, tighten the metal knobs and four red knobs on the top. Clamp size: 11" x 3" (width x height). Suggest max screen frame size: 13" x17" x 2. 1 Set of Precision Micro-registration Screen Printing Clamp---006580. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Screen Printing".
The seller is "yaxun_shopping23" and is located in this country: US. This item can be shipped to United States.