This machine is mainly used for arc screen printing of round pipe and round bar products. Suitable for metal, plastic, glass, wood and other materials such as round pipe, round bar.It is not suitable for printing elliptical pipes and bars. It is not suitable for the printing of non-smooth products with large dents or bulges on the printing surface and pitting points on the printing surface. This curved screen printing machine is mainly used for the printing of round tubes and bar type products with diameter 3/4"- 7". Max printing width 300 mm; length 250mm. (outside diameter)400350 mm, thickness of 40 mm. Squeegee size : max 7.8 200 mm wood handle. The upper and lower adjustment range is 6.2 160 mm. Middle printing frame width 11.8" (300 mm), plus additional mounting rack 18.1" 460mm. Install the screen plate and adjust the support seat under the screen plate to the basic level of the screen plate; Install screen frame pull handle. Install the scraper and fix it at a distance of 1-2 cm from the pattern.
Adjust the position of the substrate printing frame and roller bearing, place the substrate, and the spacing between the top of the substrate and the screen plate is 1-3 mm; And make the substrate the top and the bottom of the scraper aligned. Adjust the distance positioning knob of the screen plate according to the left and right dimensions of the pattern. Put ink into the screen frame. Press the scraper with the left hand (or right hand); Pull the handle with right hand (or left hand)on the screen frame to print. 1 set of 180mm Diameter Curved Screen Printing Machine for Tube(006594).
This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Screen Printing". The seller is "ascpress" and is located in this country: US.
This item can be shipped to United States.