US Anycubic Photon Mono LCD Resin 3D Printer 405nm UV Light-Cure 2.8TFT Screen

  
US Anycubic Photon Mono LCD Resin 3D Printer 405nm UV Light-Cure 2.8TFT Screen. ANYCUBIC Photon Mono LCD 3D Printer, Fast Printing UV Photocuring Resin 3D Printer with 6.08'' 2K Monochrome LCD, 5.11"(L) x 3.14"(W) x 6.49(H) Printing Size.

1ANYCUBIC Photon Mono LCD screen Adopts matrix parallel light source 15 pcs lamp beads, is able to carry out uniform exposure, improve the quality of models, Z-axis guide rail structure and stepper motor have better stability, with an accuracy of 0.01mm, it effectively eliminating layer patterns, It's a great 3D printer for printing games, movies, cartoon characters, miniatures, etc. 2Photon Mono 3D Printer's printing speed is 2.5X faster than the regular 3d printers, rapid prototyping greatly improved printing efficiency and saved more time, comes with a 6.08'' 2K Monochrome LCD and only takes 1.5 seconds per layer exposure to cure resin. 3Off-line printing function with size 5.11"(L) x 3.14"(W) x 6.49(H) / 130 x 80 x165MM, Photon Mono resin 3d printer uses a removable one-piece transparent cover to make the internal space of the machine, and the printer can be set to stop printing immediately after opening the cover, Friendly use for beginners and good performance for the enthusiasts.

4The transparent cover blocks up to 99.95% of ultraviolet rays with a wavelength of 405nm, can be effective high resin solidification rate and ensure your success printing, reduce wasting of resin, New photon mono uses One-piece FEP, which can be easier and quicker to replace. And pay attention to the custom policy, we do not undertake the tariff, hope for your kindly understanding. Founded in 2015, Anycubic has become one of the most popular 3D printer brands in the market, with around 300 employees based in Shenzhen, China. But, we didn't start fancy as it seems to look today. Graduated in 2015, I came back to China from New Zealand.

I was so excited and full of curiosity when landed in Shenzhen the first time, Mr. James Ouyang, co-founder of Anycubic and a Ph. D of University of Auckland said.

Lu Ouyang, Anycubic's Founder and CEO, is my childhood friend. He had a company before Anycubic providing electronic modules and 3D printer accessories for over 4 years. " "3D printer itself wasn't our first choice. We hadn't even had the confidence to rush in. But after seeing clients increasingly relying on us for key components of their DIY printers, We realized we could do it, and do it much better.

I didn't think much but only hope to explore more possibilities with the 3D printing technology. There is nothing to be afraid of. So why not make a difference.

In 2015, Anycubic was founded, without much hesitation. Following our heart is important. But the real world is harsh. There were so many up and downs.

We cannot remember how many sleepless nights out there at the early stage. After a whole year's hard work, the first model Anycubic Mega came on board in 2016. Fortunately our work paid off. Mega became so popular in the market in a short period of time and our journey as a professional 3D printer maker officially started.

We all were amazed and excited but we did not stop there. The second and third generations were launched soon after along the way. Indeed, 3D printing technologies can do a lot. But first of all we believe 3D printers should be accessible and affordable to all instead of being rocket science and beyond budget. We believe each one of us deserves the freedom to make our ideas, creativity and imagination a reality.

Anycubic is committed to being one of the best choices for freedom to make. Side by side with you, we know we will make it. Your better feedback will be an encouragement for us to offer the better quality and the better service in future. We shall try our best to solve your problem to your satisfaction. The item "US Anycubic Photon Mono LCD Resin 3D Printer 405nm UV Light-Cure 2.8TFT Screen" is in sale since Tuesday, May 29, 2018.

This item is in the category "Computers/Tablets & Networking\3D Printers & Supplies\3D Printers". The seller is "anycubic" and is located in Los Angeles. This item can be shipped to United States.

• Brand: ANYCUBIC
• Model: ANYCUBIC Photon Mono
• MPN: Does Not Apply
• Interface: USB 2.0
• Features: DIY Kit
• Manufacturer Warranty: 1 year
• Plug: US
• 3D Technology: LCD-based SLA
• Maximum Print Size: 130*80*165mm
• Maximum Resolution: 0,051 mm 2560*1620 2K
• Nozzle Size: NO
• Printing Speed: 50mm/h max
• Country/Region of Manufacture: China
• Item Width: 222mm
• Item Height: 383mm
• Item Length: 227mm
• Custom Bundle: NO
• Bundle Description: NO
• California Prop 65 Warning: No