Artillery Sidewinder X1 V4 3D Printer 300300400mm Printing Dual Z Touch Screen

  

Artillery Sidewinder X1 V4 3D Printer 300300400mm Printing Dual Z Touch Screen. Product Features: Exclusive Ultra-Quiet Stepper Driver - Dissipated much less heat and maintaining a higher torque comparing to other quiet stepper drivers available. Synchronized Dual Z System - Make sure both side of the gantry move ups and downs the same height and at the same speed, ensure the X carriage always move parallel to the build plate, even when one of the Z-stepper breaks down. Direct Drive Extruder - With Titan Extruder, it makes your printer more reliable, especially for flexible filaments. AC Heating Platform - For quick heating, easy to remove print models and save on masking tape.

Power Failure Protection - Continue printing from the position where the last print was stopped during the power failure, and you can stop the continuous operation or power off. Easy to Use - The 3D printer is easy to install and remove, touch screen control makes it easy to use. Product Description: Artillery Sidewinder-X1 is a 3D printer with power panic, quiet stepper drivers, direct drive extrusion, filament runout sensor, dual Z system, AC heating platform, touch screen. Adjust the print version first when you use it 2. After the printing is completed, do not directly turn off the power of the machine.

Instead, the cooling fan of the extrusion head should continue to work in order to quickly lower the temperature, so as to avoid the blockage caused by thermal expansion. Turn on the cooling fan again after heating.

Do not heat the extrusion head for a long time without using the printer. Our item is located in United States. The item "Artillery Sidewinder X1 V4 3D Printer 300300400mm Printing Dual Z Touch Screen" is in sale since Friday, May 8, 2020. This item is in the category "Computers/Tablets & Networking\3D Printers & Supplies\3D Printers". The seller is "mincheng2019a" and is located in Chino, California. This item can be shipped to United States.

• Brand: Artillery
• Model: Sidewinder X1
• Features: Heated Build Plate
• MPN: Does Not Apply
• Maximum Print Speed: 150 mm/s
• Maximum Travel Speed: 250mm/s
• Nozzle Type: Volcano
• Control Board: MKS Gen L
• Connectivity: USB, TF Card, USB Stick
• Maximum Build Plate Temperature: 130°C
• Extruder Type: Titan Extruder (Direct Drive)
• Nozzle Diameter: 0.4mm
• Filament Diameter: 1.75mm
• Printing Filament: PLA, ABS, TPU, Flexible Materials
• XYZ Positioning Accuracy: 0.05mm, 0.05mm, 0.1mm
• Layer Resolution: 0.1mm
• Frame: Aluminum Extrusion
• Build Volume: 300 x 300 x 400 mm
• Version: Latest Version 4